merak555 login No Further a Mystery
merak555 login No Further a Mystery
Blog Article
Add your APs for your network. you will require your Meraki order range (discovered on your invoice) or maybe the serial amount of Every single AP, which looks like Qxxx-xxxx-xxxx, and is also discovered on The underside with the get more info device. You will also need your company license vital, which you ought to have gained through e mail.
The Cisco Meraki MR55 is usually a twin-band organization course 802.11ax cloud-managed accessibility stage with inside antennas. Designed for significant potential and high density, the MR55 satisfies the desires of by far the most demanding environments.
The MR55 can be operated in “operate dim” method For added security and also to decrease the visibility of the entry level. With this method, the LED will not be illuminated. This method may very well be enabled by means of Meraki dashboard.
If mounting into a wall or ceiling, the Ethernet cable will feed from behind the MR55. The "energy resource solutions" portion of the document lists the various powering options and their one of a kind characteristics.
If mounting to an electrical junction box, feed the Ethernet cable in the cable entry hole during the mount cradle.
When using DHCP, the DHCP server needs to be configured to assign a static IP tackle for every MAC deal with belonging to a Meraki AP. Other features with the wireless network, which include 802.1X authentication, could rely on the home the APs have static IP addresses.
Your MR55 is supplied which has a multi-colour LED light-weight over the entrance in the unit to convey information about procedure functionality and general performance:
Tip: Pre-assemble rubber spacers and screws to the mount cradle. The mount cradle can then be held with just one hand when one other hand holds a screwdriver. If mounting your MR55 into a dropped ceiling, skip to the "ability the MR55" segment.
To release the MR55 through the mount cradle, very first get rid of the safety screw that secures the MR55 for the cradle’s base tab.
The included mount cradle template reveals the hole designs that should be used for Every variety of mount.
to connect the MR55 to the mount cradle properly, line up the best fringe of the AP With all the prime tab with the mount cradle. Considering that the cradle is previously mounted on the wall, guideline the MR55 in the direction of the highest tab and insert the very best tab in the MR55s slot.
Check LEDs the ability LED must be strong green (or blue, if shoppers are related). If it is flashing blue, the firmware is instantly upgrading and the LED should change green once the up grade is completed (Usually in just a couple of minutes). See the "LED Indicators" portion for more specifics. .
The MR55 is usually placed on a desk or shelf resting on the non-scratch rubber feet. The mount cradle is not necessary for a desk or shelf installation.
If getting used inside of a mesh deployment, the MR55 must have line of sight to not less than two other Meraki devices. A Cisco husband or wife may help make certain that your AP placement is ideal.
connect the T-rail clips to the T-rail by rotating them and snapping them into area as demonstrated. The black foam pads needs to be compressed somewhat immediately after set up.
Kensington lock – The entry position includes a hard issue that allows it for being secured to any nearby permanent composition working with a standard Kensington lock.
Report this page